Fs2004 - Captain Sim Legendary C-130 V1.1 Game [HOT]
How to Fly the Legendary C-130 Hercules in FS2004
If you are a fan of military aviation and flight simulation, you may have heard of the Captain Sim Legendary C-130 add-on for FS2004. This is a realistic and detailed simulation of the famous C-130 Hercules, a four-engine turboprop transport aircraft that has been in service for over 60 years and has been used by many countries and organizations for various missions and roles. In this article, we will show you how to install, configure and operate the Captain Sim Legendary C-130 add-on for FS2004, and give you some tips and tricks on how to fly this legendary aircraft.
Fs2004 - Captain Sim Legendary C-130 V1.1 Game
How to Install the Captain Sim Legendary C-130 Add-on for FS2004
The first step to fly the Legendary C-130 in FS2004 is to install the add-on on your computer. You can purchase and download the add-on from the official Captain Sim website, or from other online sources such as 4shared. The add-on comes in a compressed file that contains several folders and files. You need to extract the contents of the file to a temporary folder on your hard drive. Then, you need to run the setup.exe file and follow the instructions on the screen. You will need to enter your name, email address and serial number that you received when you purchased the add-on. You will also need to select the destination folder where you want to install the add-on. The default folder is C:\Program Files\Microsoft Games\Flight Simulator 9\Captain_Sim. You can change it if you want, but make sure it is inside your main FS2004 folder. The installation process may take a few minutes, depending on your system specifications. Once it is done, you will see a confirmation message that says "Installation Complete".
How to Configure the Captain Sim Legendary C-130 Add-on for FS2004
The next step to fly the Legendary C-130 in FS2004 is to configure the add-on according to your preferences and needs. You can do this by using the Captain Sim Configuration Manager, a tool that allows you to customize various aspects of the add-on, such as graphics, sounds, animations, effects and performance. You can access the Configuration Manager by clicking on Start > Programs > Captain Sim > Legendary C-130 > Configuration Manager. You will see a window that shows several tabs and options. Here are some of the most important ones:
General - This tab allows you to enable or disable some general features of the add-on, such as wing flex, propeller blur, engine smoke and contrails. You can also adjust the level of detail (LOD) of the external model and cockpit model, which affects how detailed and smooth they look at different distances. Higher LOD means better graphics but lower performance, and vice versa.
Sounds - This tab allows you to enable or disable some sound features of the add-on, such as cockpit sounds, crew voices, environment sounds and music. You can also adjust the volume of each sound category.
Animations - This tab allows you to enable or disable some animation features of the add-on, such as cargo doors, cargo ramp, paratroopers, flares and chaffs. You can also adjust the speed of each animation.
Effects - This tab allows you to enable or disable some visual effects of the add-on, such as landing lights, strobe lights, navigation lights and beacon lights. You can also adjust the brightness and size of each effect.
Performance - This tab allows you to optimize the performance of the add-on by adjusting some parameters that affect how much resources it uses on your system. You can adjust the texture resolution, texture filtering, mip mapping and anti-aliasing of the add-on. Lower values mean better performance but worse graphics, and vice versa.
You can experiment with different settings until you find the ones that suit your taste and system capabilities. You can also use the default settings if you are not sure what to change. Once you are done with your configuration, click on Save & Exit to apply your changes.
How to Operate the Captain Sim Legendary C-130 Add-on for FS2004
The final step to fly the Legendary C-130 in FS2004 is to operate it in your simulator. You can do this by selecting it from your aircraft menu in FS2004. The add-on comes with several variants and liveries of the C-130 Hercules, such as C-130E/H/J models with different engines and propellers, AC-130 gunship models with different weapons and sensors, KC-130 tanker models with refueling pods and hoses, MC-130 special operations models with different equipment and modifications, EC-130 electronic warfare models with different antennas and jamming devices, HC-130 rescue models with different search and rescue gear, LC-130 ski models with skis for landing on snow and ice, NC-130 test models with different experimental features and devices, SC-130 sea models with floats for landing on water, VC-130 VIP models with different interior layouts and decorations, WC-130 weather models with different meteorological instruments and sensors. You can choose any variant and livery that you like from your aircraft menu in FS2004.
Once you have selected your aircraft, you can start it from cold and dark state or from ready state by using different panel states that are available in your kneeboard menu in FS2004. The panel states allow you to set up your aircraft systems according to different phases of flight or scenarios. For example, if you want to start your aircraft from cold and dark state, you can use the panel state called "Cold & Dark". This will turn off all your electrical systems, engines, fuel pumps, radios and lights. You will then need to follow a checklist or procedure to start up your aircraft systems one by one until they are ready for flight. Alternatively, if you want to start your aircraft from ready state
you can use the panel state called "Ready". This will turn on all your electrical systems, engines, fuel pumps, radios and lights. You will then be ready to taxi and take off. You can also use other panel states for different situations, such as "Engine Start", "Before Takeoff", "Cruise", "Before Landing" and "Shutdown". You can access the panel states by pressing Shift+2 on your keyboard and selecting them from the kneeboard menu.
Once you have started your aircraft, you can use the 2D panels and the virtual cockpit to control and monitor your aircraft systems. The 2D panels and the virtual cockpit are fully functional and readable, and feature hundreds of custom programmed and animated controls and indicators. You can switch between different 2D panels by pressing Shift+1 to Shift+5 on your keyboard, or by clicking on the panel icons on the left side of the screen. You can also access some pop-up 2D panels by pressing Shift+6 to Shift+0 on your keyboard, or by right-clicking on some areas of the screen. You can enter the virtual cockpit by pressing S on your keyboard, or by clicking on the VC icon on the left side of the screen. You can move around the virtual cockpit by using your mouse or joystick, or by pressing Ctrl+Enter/Backspace/Shift+Enter/Shift+Backspace on your keyboard.
Once you have taken off, you can fly your aircraft according to your flight plan and mission objectives. You can use the autopilot system to assist you with navigation and altitude control. You can also use the radar system to detect and identify other aircraft and ground targets. You can also use some special features and functions of the add-on, such as cargo loading and unloading, paratroopers dropping, refueling operations, gunship firing, electronic warfare jamming and weather reconnaissance sampling. You can access these features and functions by using some keyboard commands or pop-up menus that are available in your kneeboard menu in FS2004.
Once you have completed your mission, you can land your aircraft at your destination airport or airfield. You can use the landing aids system to assist you with approach and landing guidance. You can also use some visual effects to enhance your landing experience, such as landing lights, strobe lights, navigation lights and beacon lights. You can also use some animation features to simulate your landing actions, such as cargo doors opening, cargo ramp lowering, flares and chaffs releasing and engine smoke generating.
you can use the panel state called "Ready". This will turn on all your electrical systems, engines, fuel pumps, radios and lights. You will then be ready to taxi and take off. You can also use other panel states for different situations, such as "Engine Start", "Before Takeoff", "Cruise", "Before Landing" and "Shutdown". You can access the panel states by pressing Shift+2 on your keyboard and selecting them from the kneeboard menu.
Once you have started your aircraft, you can use the 2D panels and the virtual cockpit to control and monitor your aircraft systems. The 2D panels and the virtual cockpit are fully functional and readable, and feature hundreds of custom programmed and animated controls and indicators. You can switch between different 2D panels by pressing Shift+1 to Shift+5 on your keyboard, or by clicking on the panel icons on the left side of the screen. You can also access some pop-up 2D panels by pressing Shift+6 to Shift+0 on your keyboard, or by right-clicking on some areas of the screen. You can enter the virtual cockpit by pressing S on your keyboard, or by clicking on the VC icon on the left side of the screen. You can move around the virtual cockpit by using your mouse or joystick, or by pressing Ctrl+Enter/Backspace/Shift+Enter/Shift+Backspace on your keyboard.
Once you have taken off, you can fly your aircraft according to your flight plan and mission objectives. You can use the autopilot system to assist you with navigation and altitude control. You can also use the radar system to detect and identify other aircraft and ground targets. You can also use some special features and functions of the add-on, such as cargo loading and unloading, paratroopers dropping, refueling operations, gunship firing, electronic warfare jamming and weather reconnaissance sampling. You can access these features and functions by using some keyboard commands or pop-up menus that are available in your kneeboard menu in FS2004.
Once you have completed your mission, you can land your aircraft at your destination airport or airfield. You can use the landing aids system to assist you with approach and landing guidance. You can also use some visual effects to enhance your landing experience, such as landing lights, strobe lights, navigation lights and beacon lights. You can also use some animation features to simulate your landing actions, such as cargo doors opening, cargo ramp lowering, flares and chaffs releasing and engine smoke generating.
How to Enjoy the Captain Sim Legendary C-130 Add-on for FS2004
The last step to fly the Legendary C-130 in FS2004 is to enjoy it as much as possible. You can do this by exploring the various features and functions of the add-on, flying different variants and liveries of the C-130 Hercules, trying different missions and scenarios with the C-130 Hercules, and sharing your experiences and screenshots with other simmers online.
Some of the features and functions that you can explore with the add-on are:
The interactive cockpit that allows you to click on almost every switch, knob, lever and button in the cockpit.
The custom sounds that recreate the realistic sounds of the C-130 Hercules engines, propellers, systems and environment.
The crew voices that provide you with verbal feedback and information from your co-pilot, navigator, flight engineer and loadmaster.
The environment sounds that add ambient noises such as wind, rain, thunder, birds and traffic to your flights.
The music that plays some tunes from different genres and eras during your flights.
The ACE (Aircraft Configuration Editor) utility that allows you to customize various aspects of your aircraft such as weight, fuel load, payload, equipment and liveries.
The wing views that allow you to see your aircraft from different angles and perspectives outside the cockpit.
The cargo cabin that allows you to walk from the flight deck to the cargo area via a stairwell.
Some of the variants and liveries that you can fly with the add-on are:
C-130E/H/J models with different engines and propellers for standard transport missions.
AC-130 gunship models with different weapons and sensors for close air support missions.
KC-130 tanker models with refueling pods and hoses for aerial refueling missions.
MC-130 special operations models with different equipment and modifications for covert missions.
EC-130 electronic warfare models with different antennas and jamming devices for electronic warfare missions.
HC-130 rescue models with different search and rescue gear for search and rescue missions.
LC-130 ski models with skis for landing on snow and ice for polar missions.
NC-130 test models with different experimental features and devices for test flights.
SC-130 sea models with floats for landing on water for maritime missions.
VC-130 VIP models with different interior layouts and decorations for VIP transport missions.
WC-130 weather models with different meteorological instruments
Conclusion
In this article, we have shown you how to fly the Legendary C-130 Hercules in FS2004 with the Captain Sim add-on. We have covered the installation, configuration, operation and enjoyment of the add-on, and provided you with some tips and tricks on how to fly this amazing aircraft. We hope that this article has been informative and useful for you, and that you will have a lot of fun and satisfaction flying the C-130 Hercules in FS2004. If you have any questions or comments, please feel free to contact us. Thank you for reading. d282676c82
https://www.amycrawley.com/group/amycrawley-group/discussion/e3be70ff-ceea-4d8d-bee8-cb753eb7ae5c